So your inner fender liner doesn't look like this?

 

BSP Datsuns tricycle (with the occasional bicycle) better....

 

No. We got some of that from the B-Stock days using Hoosier 275/40/17s, stock springs, Gendron bar, and Koni Shocks, but bought new liners/touched up before 2012 NTs. When the car was sold, and swithced back to stock, only the liners near the edge of the fender had been rubbed. We used the 60mm offset wheel and an 8mm+- spacer for the brakes. Im sure the BSP car will get some of that though...

-Marc

 

That's still odd that you don't use that much travel with 700lb springs and a saner type bar.

Here's my car at t-hill

 

Hi marc88, any further updates with TTX?

Sent from my GT-I9300T using Tapatalk

 

I have a TTX on my mountain bike if that says anything. It didn't come with it either

 

I've put at least 20 race weekends on my TTXes in the past 2.5 years and they still feel good. Dropping them off at PSI soon to be checked and oil changed prior to runoffs. Will report back on what if any maintenance they required.

 

i know its old by now, but did they require any work cracknut??

 

One of them required a few maintenace parts and the other 3 were just fluid. Pretty minor.

 

There's a group buy for these now.


https://www.s2ki.com/s2000/topic/111...ine-urge-spec/