No, the Fiber Image CF hood.

 

[QUOTE]Originally posted by Argetni
[B]2x6spds...I attached it to the CF cover of the comptech intake.

Stwok...I have removed the CF cover and still have the problem

Just an FYI this is my second Comptech CAI...The first one did not fit until I did alot of trimming(to the airbox).

 

Once again, here is what I did to solve the resonance problem.

I took a piece of high-density packing foam, the kind used in packing electronics. The piece was 3/8th of an inch thick and a 4 x 5 inch rectangle. I used it to cover the hole on the top of the air box where the support rod goes. This solved the problem !!!

Pic1 is of the completed install of the CAI. ( Sorry about the reflection from the florescent lights. )

Pic2 is with the piece of in place.

Pic3 shows the thickness of the foam.





This fix really works ! Plug the hole.

 

I don't know about anyone else, but I don't like paying $350.00+ for a part that I must apply high-density packing foam to.

FYI, I am running with no CF air-box cover at all, and I still get terrible resonance. I guess I will have to put the cover back on and stuff it with some foam

Anyone want a comptech intake for $300.00? Shipped. for real.

 

I just found that I have the same problem... I will go buy some padding to prevent the vibration in the future..!!
no biggie to me..!!

 

[QUOTE]Originally posted by Argetni
[B]I don't know about anyone else, but I don't like paying $350.00+ for a part that I must apply high-density packing foam to.

 

I have the same problem, did comptech ever develop a fix for this?

 

Here's that DYNO you asked for. We recently has a DYNO Day and Kibro had just installed the Comptech CAI and he also has the SPOON Exhaust. He's stock other than those 2 mods.

I'm particularly impressed with the Torque of 140.