It was a b!tch to put on! Seems like the holes for the fasteners are off by just a tiny bit, but that's enough for the fasteners to NOT go on properly.

Any suggestions?

 

At least one other had that problem (a search may find the comments). For most of us it fit perfectly and just needed to be screwed in and torqued down.

 

Mine went on easily. The last bolt was the hardest and I had to only push a little forward on the brace to get it in. I didn't tighten all the bolts down. Just enough to get them threaded and secure...then put the last one in. Piece of cake. It took more time to jack up the car.

 

Silversufer is correct... only thread it in enough to be secure and you won't have any problem putting in the last bolt.

No problems here...

 

[QUOTE]Originally posted by SilverSurfer
Mine went on easily. The last bolt was the hardest and I had to only push a little forward on the brace to get it in.

 

got it, thanks!

 

I had probelms with 2 cars mine and another. I jacked the car up on one side so the weight and pressure im sure was off. I had to lossen up the 2 bolds that were on the plate so the screws would line up. After that the last bold went in perfectly! Its that last bolt! Lossen those 2 connector bolts and your done.