S2000 Talk Discussions related to the S2000, its ownership and enthusiasm for it.

Dyno # ? 1/4 time?

Thread Tools
 
Old Aug 29, 2008 | 01:04 PM
  #1  
EddieAtATL's Avatar
Thread Starter
 
Joined: May 2007
Posts: 2,013
Likes: 0
Default Dyno # ? 1/4 time?

guys i got some questions

i have a 07' with the following

k&n short ram
invidia header
j's tp
hks hipower
vafcII

only the tp+hks is installed on my car right now, the remaining is waiting to install.

with vafcII tuned, what numbers should i be looking for ?

with good tires and tein RA suspension, whats a ball park for the 1/4 time? i know s2k isnt about 1/4 mile but i sure would like to know where my car stands.

thanks in advance
Reply
Old Aug 29, 2008 | 01:06 PM
  #2  
jirro22's Avatar
Registered User
 
Joined: Dec 2006
Posts: 1,143
Likes: 0
From: ca
Default

its hard to say, how r u on ur drivin skills,
considering u know how to drag race.. i say high 13's, and maybe mid 13's on a bfg drag radials..

good luck...
Reply
Old Aug 29, 2008 | 01:09 PM
  #3  
EddieAtATL's Avatar
Thread Starter
 
Joined: May 2007
Posts: 2,013
Likes: 0
Default

i would say my 60ft is about a 2.0-2.2 , launching and shifting isn't a problem for me at the moment, but the question is the car lol

i was aiming at 13s with these bolt ons, hell i was aiming at 13.8 stock but factory isn't 100% accurate
Reply
Old Aug 29, 2008 | 01:23 PM
  #4  
Wicked Saint's Avatar
Registered User
 
Joined: Jun 2008
Posts: 11
Likes: 0
Default

about 2 months after I bought my 01 on potenzas I took it to Infinion and ran a 14.9 and 14.95 then I lowered tire pressure to 28lbs and ran a 14.67. This was my 1st day ever on the track and except for Buddy club racing specs and aem v2 intake car is stock and had 39k on it. I know this data won't help too much but may give ya a decent baseline.
Reply
Old Aug 29, 2008 | 01:31 PM
  #5  
EddieAtATL's Avatar
Thread Starter
 
Joined: May 2007
Posts: 2,013
Likes: 0
Default

knowing you ran a 14.6 doesn't comfort me AT ALL

=(
Reply
Old Aug 29, 2008 | 01:33 PM
  #6  
Revenge's Avatar
Registered User
 
Joined: Oct 2007
Posts: 2,259
Likes: 0
From: Annapolis MD
Default

You'll get low 14's, you need to be perfect to get anything better, it could be possibly worse. Don't be disappointed.
Reply
Old Aug 29, 2008 | 04:07 PM
  #7  
smirfs2k05's Avatar
Registered User
 
Joined: Jan 2006
Posts: 8,255
Likes: 0
From: Victorville
Default

I averaged 14.2-14.4..

mods are comptech header, gutted air box/snorkel, oem cat, spugen single

Next time I'll go it'll be same except for act clutch/ap1 flywheel and invidia 70mm
Reply
Old Aug 29, 2008 | 04:28 PM
  #8  
Sticky2k's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,951
Likes: 0
From: Dallas TX
Default

I was in the 14.2-14.5 95-99mph stock hopefully w/ my exhaust, testpipe, intake and vafcII. Ill hit high 13's
Reply
Old Aug 30, 2008 | 06:52 PM
  #9  
S2SEXY's Avatar
 
Joined: Jun 2005
Posts: 2,038
Likes: 0
Default

stock ran a 13.7 launching at 8k with a 1.99 60ft
Reply
Old Aug 30, 2008 | 08:07 PM
  #10  
qbmurderer13's Avatar
Registered User
 
Joined: May 2007
Posts: 2,140
Likes: 0
From: Orlando, FL
Default

Bolt ons dont do much in terms of power. You probably gained a couple of hp with the tune and intake, but then you probably lost some too with exhaust. Ive seen stock s2ks break into 13s and full bolt on s2ks that run high 14s. It doesnt really matter what mods you have.
Reply



All times are GMT -8. The time now is 05:01 PM.