i ran 2/2 on re01rs at sows last time, didnt try 1/1 but the rear end wasnt stepping out, i was getting a little understeer. maybe it was just my driving. it only stepped out on the off camber turn after the tires started getting slippery. 5 is too soft i think. i run 4/4 on the street and ran 4/4 at buttonwillow and actually liked it better than 2/2 because i could cut corners a little more.

 

The full stiff setting is to minimize the body roll.

 

Ok great advice guys. I will let you know how the day turns out tomorrow...

 

gangster

 

I tried 1 / 3... with RE-01R's rear felt a bit soft. Spent the rest of the day at 1/1... a bit stiff for the development track at mosport, but the car was a monster.

Instructor took my S2K out for an instructional session with VSA off and made lunch out of the entire grid - including 2 NSX's, a 350z, a Saleen, and an M Roadster. The instructor in the M Roadster thought my car was blown. This car is a razerblade on the track.

Very impressed.

 

Here is a photo of Mark and I on the development track...

 

Nice

What's your alignment setup and ride height of the car?