Here are a few more shots of the sensor locations for the water and air temp sensors. I'll take a few more next weekend of the oil temp and pressure set up. See this thread for the full post:

https://www.s2ki.com/forums/showthread.php?...t=gauge+install

The air temp sensor (the metal tab with the hole) is positioned in front of the throttle body, near the spot where the intake connects.



The water temp senor is in the upper radiator hose, about 6 inches back from the radiator. I had to cut open the braided stainless hose to do this install, which was painful, figuratively and literally -- those stainless wire ends are sharp! It's a little ragged still, but I have plans to clean it up.




Here's a longer view of the two: