Replacing your convertible top with a Robbins Top
Registered User
Joined: May 2009
Posts: 6
Likes: 0
Or................ You could buy some 15cm wide matt black adhesive tape and tape over the crack on both sides. Keep your original hood until it wears out in the classic places or gets a knife through it. All that will happen is your car will look as though it has a glass back window until you look closely. I'd rather have an Invidia full system or a complete set of sticky brand new tyres!
Registered User
Joined: Jul 2010
Posts: 286
Likes: 0
Soft top motor install....
Followed this tutorial. It is amazing help. The new soft top frame and cloth is now on my car. When do I install the motors and is there an alignment I have to do between the teeths?
Also, any tips on installing those two clips on the front of each side of the rubber rain rail? Besides tape
Followed this tutorial. It is amazing help. The new soft top frame and cloth is now on my car. When do I install the motors and is there an alignment I have to do between the teeths?
Also, any tips on installing those two clips on the front of each side of the rubber rain rail? Besides tape
Registered User
Joined: Apr 2007
Posts: 10
Likes: 0
From: South Jersey
...Next, fold the top mechanism halfway back. Take the long straps and attach them to the mounting peg directly behind them in front of the rubber guard. While keeping the strap in place, replace the metal trim pieces onto the metal pegs. Place the nuts on right away to keep it from falling off, but don
Thanks for a great DIY thread, we appreciate your time and detail. For some reason it ended after the post above. I noticed some of the repies throughout the 10 pages were also truncated. Does anyone know how I can get the rest of the instructions? Thanks again, Cyclon.
Rick
Oh, I see I'm not alone with lost info.