eyy everyone,

i have an issu with my camber adjustment.

on the left hand side i can get -3.5 degrees of camber. n on the right i can only get -.5 degrees.

originally i they measured the that the right lower control arm was slightly bent, so it was changed and fixed the problem a tiny bit. but i still have the issue. the next thing that could be bent could be the stub axle....

does anyone have any input into what this issue might be. or whats bent. i had the chassis measured for square and its all within spec.

anyone????????

cheers

phil

 

Bent knuckle. The wheel was likely hit on the bottom and bent the knuckle positive. Seen it before.