Pilot bearing?

Reply Subscribe

Thread Tools

Sep 10, 2014 | 10:37 AM

p0staboy

Thread Starter

Registered User

Joined: Oct 2009

Posts: 760

Likes: 1

Pilot bearing?

I'm putting the oem flywheel and clutch back onto my car and it came with this small bearing. I'm not sure where it goes. Can anyone chime in?

Sep 10, 2014 | 10:47 AM

Billman250

Moderator

Joined: Jul 2002

Posts: 22,382

Likes: 1,832

From: Long Island, New York

If the part number contain the numbers 204, then its a pulley bearing. Not used anywhere in the clutch.

Sep 10, 2014 | 12:33 PM

cdelena

Joined: Oct 2000

Posts: 9,210

Likes: 7

From: WA

Looks to me like the bearing that presses into the center of the flywheel. The flywheel pictured (I assume that is what it is) does not look like an S2000 unit.

Sep 10, 2014 | 01:02 PM

jimboslice

Joined: Jul 2013

Posts: 657

Likes: 16

From: Ellensburg

Quote:

Originally Posted by cdelena

Looks to me like the bearing that presses into the center of the flywheel. The flywheel pictured (I assume that is what it is) does not look like an S2000 unit.

No, it's way too small.

Sep 10, 2014 | 05:03 PM

cdelena

Joined: Oct 2000

Posts: 9,210

Likes: 7

From: WA

Quote:

Originally Posted by jimboslice

Quote:

Originally Posted by cdelena' timestamp='1410381205' post='23325216

Looks to me like the bearing that presses into the center of the flywheel. The flywheel pictured (I assume that is what it is) does not look like an S2000 unit.

No, it's way too small.

Kinda hard to tell from the picture but the transmission shaft is about 3/4 inch and a gloved finger is about that.

Sep 10, 2014 | 05:44 PM

p0staboy

Thread Starter

Registered User

Joined: Oct 2009

Posts: 760

Likes: 1

Quote:

Originally Posted by cdelena

Looks to me like the bearing that presses into the center of the flywheel. The flywheel pictured (I assume that is what it is) does not look like an S2000 unit.

theirs already one of these bearings presssed into the flywheel. that flywheel is a s2000 one