First Name: David M.
Price Desired: 200 and under
Contact: Pm or text 818.334.7748

Looking for a front and back camber kit for my ap1

 

I have two SPC camber joints, which can be used in the front or rear. I'm asking $100. PM me if you're interested.

~Nam

 

i got buddy club n+ coilovers

 

Both pm'd

 

s2k. Couldn't send u a pm please text me or call me 818.334.7748 thanks.

 

If you have an AP2, I have camber joints installed on front upper A-arms. I'll do an arm swap with you + cash on your end. Arm swap is cheaper than paying for an install/uninstall by far.

Combined with VitaRenovatio's pair you'd have camber joints on all 4 corners.

 

I have a ap1

 

The front upper A-arms are the same between AP1 and AP2. So the upper arms are compatible.

The SPC joint can be used in the front if you have 16" or larger wheel. The SPC joint can be used in the rear if you have 17" or larger wheel. Since you have 18" wheels, you can use the SPC joint on both the front and rear.

From SPC's website:
http://www.spcperformance.com/compon...AFrom&to=USATo

"Designed specifically for the S2000, this ball joint corrects camber on both the front and rear. An OE quality ball joint, this adjustable part corrects camber up to +/- 1.5 degree.

NOTE: The rear applications are ONLY for vehicles equipped with 17" rims or larger. Front applications work with all stock rim sizes and larger.

Front/Rear Adjustment range: Camber -1.5 degree to +1.5 degree
Installation Time: .6 hr/side
Required: 1 per wheel

Caution: Rear application for vehicles with 17" rims or larger."

 

Where are u guys located text me