Downforce, APR, Chargespeed - Carbon Fiber Aero Parts
#1
Former Sponsor
Thread Starter
Join Date: Aug 2002
Location: Orange County, CA
Posts: 9,578
Likes: 0
Received 0 Likes
on
0 Posts
Downforce, APR, Chargespeed - Carbon Fiber Aero Parts
Downforce Carbon Fiber Products from Go Tuning Unlimited
PRICE MATCH GUARANTEE on all Downforce products
Downforce Carbon Fiber Front Splitter Lip
The Downforce Front Splitter Lip was designed to complement the popular Downforce Side Diffusers with an aerodynamic advantage. This lip acts as a front spoiler to increase front end stability and downforce. Designed specifically for the AP2 front bumper the lip bolts up directly using factory mounting holes. As with all Downforce products, Made in USA.
MSRP: $425
Our Price: $285
For AP2 Bumper with OEM AP2 Lip
For AP2 Bumper
Downforce Rear Diffuser
The Downforce AP2 Rear Diffusers are finally available for sale! Here are some details about the final production kit. It was designed to complement the popular Downforce Side Diffusers and also be aerodynamically functional. The rear center section reaches all the way in front of the diff and attaches to the rear lower tie bar.
8-piece Carbon diffuser kit includes COMPLETE hardware set necessary for install.
Made in USA.
Complete Carbon Version
MSRP is $1,550
Center Only FRP Version
MSRP is $900
Features:
- Extended length for greater aerodynamic efficiency
- Removable fins for easy damage repair
- Optional center end cap (included)
- Anodized aluminum edge reinforcement to increase rigidity for added stability
- Molded side diffusers for flush fitment to AP2 rear bumper
- Anodized aluminum rear lower tie bar and rear bumper brackets
- Stainless steel bolts, nylon washers, and rubber nuts with brass fittings for rust resistance
Center only FRP version
Downforce Wide Front Fenders
Downforce Wide Front Fenders are 30mm wider and standard OEM fenders. Fits all front bumpers. The body line that runs next to the edge of the hood as been sharpened for a slightly more aggressive look. Features carbon fiber reinforced mounting points for added durability and resistance to cracking.
- Fits all S2000 model years. FRP construction.
- Carbon reinforcements.
- Made in USA
MSPR $850 + shipping
Our Price: $795 + shipping
Downforce Carbon Fiber Side Diffusers
- Completely original design built from scratch (using a clay mold) exclusively for the S2000
- Mounts directly onto the body using self-tapping screws (included) that are pre-marked
- High polish clearcoat finish
- Full Carbon Fiber construction
- Weighs less than 1 lb per side! Under 2 lbs total for both sides!
- Available in 1x1 and 2x2 Weave Carbon Fiber
MSPR $450 + shipping
Our Price: $427.50 + shipping
Downforce Sport Lip
Made with ultra high quality fiberglass. This is not the typical Chinese Vflex / Duraflex / or cheap gimmick. Consist of lightweight performance composites with high modulus makes it ideal for automotive aerodynamic parts. Grade A surface (no waves, no pits, no blocking!). High temperature rating can withstand over twice the amount of heat of any other companies resin. No shrinkage so these parts will fit like factory parts.
Price for FRP is $474 + shipping
Price for CFRP is $599 + shipping
Downforce Carbon Fiber Header Heat Shield
- Available in 1x1 or 2x2 Weave
- Modeled after the original OEM heat shield
- Replaces OEM heatshield and bolts on directly
- Full Carbon Fiber construction for strength and durability
- Polished clearcoat on both sides with an embossed "DF" logo
- Weighs only .75 lbs!
MSPR $250 + shipping
Our Price: $237.50 + shipping
================================================== =====
Shipping/Insurance Info:
- Shipping cost will be determined by location.
- Insurance will be included on all orders.
- Shipping to Canada, Hawaii, Alaska, or international. Please PM me for shipping quote.
- For local pick up please PM me. We are located in Orange County, CA.
- The product(s) will be very well packaged.
Payment Info:
- You can order by phone, email, PM, or through our website at gotuning.com
- We accept Visa, Mastercard, Discover, Paypal, Cash, Bank Cashier's Check.
- All order MUST be shipped to billing address or confirmed address for paypal.
- Paypal payments can be sent to paypal@gotuning.com.
- 8.75% Sales Tax sales tax is required for all sales within California.
PRICE MATCH GUARANTEE on all Downforce products
Downforce Carbon Fiber Front Splitter Lip
The Downforce Front Splitter Lip was designed to complement the popular Downforce Side Diffusers with an aerodynamic advantage. This lip acts as a front spoiler to increase front end stability and downforce. Designed specifically for the AP2 front bumper the lip bolts up directly using factory mounting holes. As with all Downforce products, Made in USA.
MSRP: $425
Our Price: $285
For AP2 Bumper with OEM AP2 Lip
For AP2 Bumper
Downforce Rear Diffuser
The Downforce AP2 Rear Diffusers are finally available for sale! Here are some details about the final production kit. It was designed to complement the popular Downforce Side Diffusers and also be aerodynamically functional. The rear center section reaches all the way in front of the diff and attaches to the rear lower tie bar.
8-piece Carbon diffuser kit includes COMPLETE hardware set necessary for install.
Made in USA.
Complete Carbon Version
MSRP is $1,550
Center Only FRP Version
MSRP is $900
Features:
- Extended length for greater aerodynamic efficiency
- Removable fins for easy damage repair
- Optional center end cap (included)
- Anodized aluminum edge reinforcement to increase rigidity for added stability
- Molded side diffusers for flush fitment to AP2 rear bumper
- Anodized aluminum rear lower tie bar and rear bumper brackets
- Stainless steel bolts, nylon washers, and rubber nuts with brass fittings for rust resistance
Center only FRP version
Downforce Wide Front Fenders
Downforce Wide Front Fenders are 30mm wider and standard OEM fenders. Fits all front bumpers. The body line that runs next to the edge of the hood as been sharpened for a slightly more aggressive look. Features carbon fiber reinforced mounting points for added durability and resistance to cracking.
- Fits all S2000 model years. FRP construction.
- Carbon reinforcements.
- Made in USA
MSPR $850 + shipping
Our Price: $795 + shipping
Downforce Carbon Fiber Side Diffusers
- Completely original design built from scratch (using a clay mold) exclusively for the S2000
- Mounts directly onto the body using self-tapping screws (included) that are pre-marked
- High polish clearcoat finish
- Full Carbon Fiber construction
- Weighs less than 1 lb per side! Under 2 lbs total for both sides!
- Available in 1x1 and 2x2 Weave Carbon Fiber
MSPR $450 + shipping
Our Price: $427.50 + shipping
Downforce Sport Lip
Made with ultra high quality fiberglass. This is not the typical Chinese Vflex / Duraflex / or cheap gimmick. Consist of lightweight performance composites with high modulus makes it ideal for automotive aerodynamic parts. Grade A surface (no waves, no pits, no blocking!). High temperature rating can withstand over twice the amount of heat of any other companies resin. No shrinkage so these parts will fit like factory parts.
Price for FRP is $474 + shipping
Price for CFRP is $599 + shipping
Downforce Carbon Fiber Header Heat Shield
- Available in 1x1 or 2x2 Weave
- Modeled after the original OEM heat shield
- Replaces OEM heatshield and bolts on directly
- Full Carbon Fiber construction for strength and durability
- Polished clearcoat on both sides with an embossed "DF" logo
- Weighs only .75 lbs!
MSPR $250 + shipping
Our Price: $237.50 + shipping
================================================== =====
Shipping/Insurance Info:
- Shipping cost will be determined by location.
- Insurance will be included on all orders.
- Shipping to Canada, Hawaii, Alaska, or international. Please PM me for shipping quote.
- For local pick up please PM me. We are located in Orange County, CA.
- The product(s) will be very well packaged.
Payment Info:
- You can order by phone, email, PM, or through our website at gotuning.com
- We accept Visa, Mastercard, Discover, Paypal, Cash, Bank Cashier's Check.
- All order MUST be shipped to billing address or confirmed address for paypal.
- Paypal payments can be sent to paypal@gotuning.com.
- 8.75% Sales Tax sales tax is required for all sales within California.
#2
Former Sponsor
Thread Starter
Join Date: Aug 2002
Location: Orange County, CA
Posts: 9,578
Likes: 0
Received 0 Likes
on
0 Posts
Go Tuning Unlimited is an Authorized Direct APR Distributor!
APR Rear Diffusers in Carbon and FRP
To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.
Features:
- Available in Carbon Fiber and FRP
- Fits AP2 or AP1 Rear Bumpers
- Carbon Fiber Reinforced Plastics (CFRP or FRP) Construction
APR Formula GT3 Mirrors
APR Front Air Dam
APR Front Wind Splitter
APR GT Front Bumper
APR Front Carbon Fiber Canards
APR GTC-200 Adjustable Wing
APR Radiator Cooling Plate
APR Carbign Craft Mirror Covers
APR Carbign Craft Spark Plug Cover
APR Carbign Craft Rear Bumper Carbon Heat Shield
APR Rear Diffusers in Carbon and FRP
To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.
Features:
- Available in Carbon Fiber and FRP
- Fits AP2 or AP1 Rear Bumpers
- Carbon Fiber Reinforced Plastics (CFRP or FRP) Construction
APR Formula GT3 Mirrors
APR Front Air Dam
APR Front Wind Splitter
APR GT Front Bumper
APR Front Carbon Fiber Canards
APR GTC-200 Adjustable Wing
APR Radiator Cooling Plate
APR Carbign Craft Mirror Covers
APR Carbign Craft Spark Plug Cover
APR Carbign Craft Rear Bumper Carbon Heat Shield