alright guys i have an '00 and my left rear suspension got ****ed, i replaced the knuckle, axle, strut, and lower control arm and the bottom of the nut where the knuckle connects to the lower control arm scrapes my rim when i hit a bump....currently my upper portion of the rim is stickin out and the lower part is stickin in....and on the other rim its the opposite.... does the car need to get re-alligned to fix the problem? or could my upper control arm be screwed also?

 

correction... the bolt from the strut that connects the lower control arm and strut ...thats the one that hits the rim ...the edge of the rim.....

 

you could of f**ked up the subframe, I would take to Curt, if you can and let him look at it.