StormTroopinAP2

Has anyone installed an aftermarket hub and wheel? I've looked at the DIYs but I'm still kinda confused about wiring the SRS resistor and horn. It's an NRG short hub and quick release.


Sent from my iPhone using Tapatalk

tx2K

Cant help on your question, but I laugh every, and I mean every time I see your sig! good luck with install though!

OkiDan

I'm in the same boat, from what I've gathered we have to buy a Works Bell223-S it comes with a SRS fix. Which bought one separate for my NRG QR n short hub. But I've heard that NRG made a newer short hub that when modified you still have your horn and no SRS light. I'll let you know what I come up with on my install.

StormTroopinAP2

When are you planning on installing yours?


Sent from my iPhone using Tapatalk

OkiDan

Well I'll started working on it today, and well the NRG short hub is crap(as far as it doesn't have the SRS fix and no instructions)
So I'll do some more research and try again later or buy the Works Bell...

http://forums.clubrsx.com/showthread.php?t=718259

As you can see from the link, no turning back..so I'd look into getting the Works Bell

StormTroopinAP2

This is the link I found and he didn't tear all that stuff out

http://www.s2000.org/mods/hub/

My short hub came with a resistor to keep the light from coming on


Sent from my iPhone using Tapatalk

OkiDan

True, I was trying to follow the info on that link. But the hub will only fit under the SRS n horn ring, so not a 100% about the wires so.
What's the part # of the hub you have?

StormTroopinAP2

My hub is SRK-131H


Sent from my iPhone using Tapatalk

OkiDan

Swapped out my hub for the proper one, everything went in easy this time. Though my SRS light is still one, I'll swap out the resistor and see if that's the fix. Other then that, I still getting use to the new wheel. But I like being able to take it with me and lock the hubs up for extra security.