thrown a cel after an oil change, i am going to reset ecu shortly and see if it goes away. if not i'll get a code reader, any recommendations which is best? Geniscan gs300? Scanguage seems to cause as many problems as benefits?

slight rattly noise since oil change, nothing particularly unusual, but not been driven anywhere so dont know why this has happened. Could be valve related, maybe clearances or worse.

oil castrol edge via opie

 

Yes geniscan, if you have a JDM s2000 you can read yourself via paperclip and blink method.

Strange you have a CEL light after an oil change tho

 

yup I thought strange too.

Anyway, after ecu reset no more CEL, idle for 20mins, very tentative spin round the block, gradual build up of revs over 20min drive, still no CEL so fingers crossed.

maybe bit of oil spillage on a coil pack, or wobbly volts or something. Who knows. I'll drive like a girl for the next 50 miles and see what happens.

However, beginners question - the oneshot-ness of the window has gone, how do I retrieve it ?

 

Wind it down, hold the button,

Wind it up Hold the button,

Repeat.

Should be ok

 

yeah just tried that, is same on my mondeo and galaxy but not worked?!

other posts say leave it a few days and it will come back so we will see. Maybe the elecs have freaked out a bit and need time to contemplate.

 

keep repeating it, hold the button a good 5-10secs at each end.

 

yup tried that too, all sorts of combo's but still no oneshot !

I'll let it have a good nights sleep and see if its in a better mood tmrw.

 

oneshot came back ystdy part way through my journey to work. I had to stop to put the roof up in a downpour and after that the oneshot was ok.