Fuse for alarm
Hi all, can anyone tell me where the fuse for alarm is located? ive no handbook!, the central locking works from key but not the fob! cant seem to reprogram the fob either
Thanks all
Thanks all
Hamilton and palmer alarm?
Black square box fob with two buttons? Early (MY00 - car)?
If so, there is normally a four or five stack bundle under the drivers side of the dash close to the ignition barrel wiring, often taped or cable tied, and will be separate from the rest of the loom. It 'looks' kind of different too. Make sure you check the fuses thoroughly, not just visually as the break may be very small.
Black square box fob with two buttons? Early (MY00 - car)?
If so, there is normally a four or five stack bundle under the drivers side of the dash close to the ignition barrel wiring, often taped or cable tied, and will be separate from the rest of the loom. It 'looks' kind of different too. Make sure you check the fuses thoroughly, not just visually as the break may be very small.
Hamilton and palmer alarm?
Black square box fob with two buttons? Early (MY00 - car)?
If so, there is normally a four or five stack bundle under the drivers side of the dash close to the ignition barrel wiring, often taped or cable tied, and will be separate from the rest of the loom. It 'looks' kind of different too. Make sure you check the fuses thoroughly, not just visually as the break may be very small.
Black square box fob with two buttons? Early (MY00 - car)?
If so, there is normally a four or five stack bundle under the drivers side of the dash close to the ignition barrel wiring, often taped or cable tied, and will be separate from the rest of the loom. It 'looks' kind of different too. Make sure you check the fuses thoroughly, not just visually as the break may be very small.
Pm me if any further info for me thanks again
Lee
Thread
Thread Starter
Forum
Replies
Last Post




