Mark this thread as Unsold
FS: Forged & sleeved F20 running engine
#1
Thread Starter
Join Date: Sep 2014
Location: Lowestoft
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Forged & sleeved F20 running engine
Selling my forged and sleeved jdm f20 engine, reason being as returning the car back to a stock motor and need to free up some money for house! Engine has done around 2500miles, of which 1500 where running in! Engine runs perfect no knocks or bangs, also have a video of engine running before engine was removed if anyone wishes to see it!
Engine is now out of car and sat in the garage so need it out of the way
Compression:
Cylinder 4:194psi
Cylinder 3:198psi
Cylinder 2:193psi
Cylinder 1:192psi
Spec:
9:0.1 cp pistons 88mm bore
brian crower h beam rods
Uprated 725+ rod bolts
Larger 80psi wrist pins
Kings race bearings
Darton wet/mid sleeves
Oem head gasket
Apr head studs
Supertech 80psi dual springs & ti retainers
Supertech dished valves, standard intake and exhaust sizes
Supertech valve guides & seals
Standard ap1 cams
All new seals chains guides gaskets oil pump ect everything new!
A stock engine will cost you £3500 easily and parts and labour for built motor are £5000+ so this is a bargain!
Priced to sell.
£4300 ovno
Offers welcome!
Willing to spilt the block and head if people don’t want the whole engine.
Any questions don’t hesitate to ask
For some reason S2KI isn't letting me upload the photos, I will keep trying but for now I can email them to you if you wish.
Engine is now out of car and sat in the garage so need it out of the way
Compression:
Cylinder 4:194psi
Cylinder 3:198psi
Cylinder 2:193psi
Cylinder 1:192psi
Spec:
9:0.1 cp pistons 88mm bore
brian crower h beam rods
Uprated 725+ rod bolts
Larger 80psi wrist pins
Kings race bearings
Darton wet/mid sleeves
Oem head gasket
Apr head studs
Supertech 80psi dual springs & ti retainers
Supertech dished valves, standard intake and exhaust sizes
Supertech valve guides & seals
Standard ap1 cams
All new seals chains guides gaskets oil pump ect everything new!
A stock engine will cost you £3500 easily and parts and labour for built motor are £5000+ so this is a bargain!
Priced to sell.
£4300 ovno
Offers welcome!
Willing to spilt the block and head if people don’t want the whole engine.
Any questions don’t hesitate to ask
For some reason S2KI isn't letting me upload the photos, I will keep trying but for now I can email them to you if you wish.
Last edited by jbjb; 10-29-2018 at 12:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ScienceofSpeed
Member S2000 Classifieds and For Sale
6
09-18-2009 03:14 PM