Cam's detailing/paint correction projects - Updated with sweet before/after vid!
#45
Registered User
Thread Starter
It's actually his DC2. I've never seen paint in such bad condition lol. The hood looked like it was painted MATTE white. I'll try to get the pics up tonight .
#46
Registered User
Thread Starter
APRIL 2nd/3rd, 2011 - Yes, this was a 2 day project
This was Hakkaboy`s 95 Integra GSR, and it needed some serious attention. The cleaning alone of the exterior/jambs/engine and wheels took the most part of a day. The polishing/paint correction took another day. Wow, what a transformation.
White is very difficult to photograph, it looks much better in person!
Arrival : Just looks like a dirty white car until you start looking closely... The hood appeared a different color as it was so badly oxidized, the wheels had serious brake dust caked into them, the trim had years of dirt stuck in the cracks... the engine bay was in rough shape.
Playing with our new toy
Tons of fallout/contaminants on the paint even after a thorough wash
This was Hakkaboy`s 95 Integra GSR, and it needed some serious attention. The cleaning alone of the exterior/jambs/engine and wheels took the most part of a day. The polishing/paint correction took another day. Wow, what a transformation.
White is very difficult to photograph, it looks much better in person!
Arrival : Just looks like a dirty white car until you start looking closely... The hood appeared a different color as it was so badly oxidized, the wheels had serious brake dust caked into them, the trim had years of dirt stuck in the cracks... the engine bay was in rough shape.
Playing with our new toy
Tons of fallout/contaminants on the paint even after a thorough wash
#47
Registered User
Thread Starter
Trying out Sonax Total Effect (sprays on green then turns red as it eats away brake dust - did not work nearly well enough on these wheels)
The wheels needed to be hand scrubbed (took 2 hours to remove all of the caked on brake dust - you can see how stubborn the dust was in these photos)
Removing rust stains
Halfway through cleaning inside the gas cap - needed to be taken off to get in all the tight spots
Yuck
Another thorough wash including wheel wells
The wheels needed to be hand scrubbed (took 2 hours to remove all of the caked on brake dust - you can see how stubborn the dust was in these photos)
Removing rust stains
Halfway through cleaning inside the gas cap - needed to be taken off to get in all the tight spots
Yuck
Another thorough wash including wheel wells
#49
Registered User
Thread Starter
Before/After of a side panel
Polished on the left, original on the right
Residue caked into the paint from antenna we removed
Very stubborn sticker removed off the glass
Scuff mark removed from front bumper
Left headlight polished, right headlight original (notice how foggy it is). Pitting could not be removed without wet sanding but a polish improved it greatly)
Driver's side polished up
Removed the spoiler to clean/polish properly
Before/After of the bumper
Polished on the left, original on the right
Residue caked into the paint from antenna we removed
Very stubborn sticker removed off the glass
Scuff mark removed from front bumper
Left headlight polished, right headlight original (notice how foggy it is). Pitting could not be removed without wet sanding but a polish improved it greatly)
Driver's side polished up
Removed the spoiler to clean/polish properly
Before/After of the bumper