Racing Hart CP035R
#1
Registered User
Thread Starter
Racing Hart CP035R
The CP035R resembles the Workmeister S2R rims, but look slightly better to my eye. They are also about $100 cheaper a rim. I do not know the weight of the Racing Hart rims so can't make a comparison there.
Racing Hart: http://www.abcwheels.com/Images/Pwheels/Ra...rt_p/CP035R.JPG
Work: http://www.worksuperwheels.com/wheels/meister_s2r.html
The Racing Harts come in an appropriate offset for the rear (9" wide with 60mm offset), but come with a 20mm offset for the 8" wide fronts and a 40mm offset if you used 8.5" wide on the fronts
I know some people have been able to use spacers to make some rims with the wrong offset fit. Would this be one of those offsets? Or do I have my offsets backwards - again.
Yes, I know I would need longer studs, just curious is all.
Would the 8.5" even fit on the front?
Racing Hart: http://www.abcwheels.com/Images/Pwheels/Ra...rt_p/CP035R.JPG
Work: http://www.worksuperwheels.com/wheels/meister_s2r.html
The Racing Harts come in an appropriate offset for the rear (9" wide with 60mm offset), but come with a 20mm offset for the 8" wide fronts and a 40mm offset if you used 8.5" wide on the fronts
I know some people have been able to use spacers to make some rims with the wrong offset fit. Would this be one of those offsets? Or do I have my offsets backwards - again.
Yes, I know I would need longer studs, just curious is all.
Would the 8.5" even fit on the front?
#2
http://www.hartwheels.co.jp/cat_racinghart...p035r_index.htm
S2000 AP1 Front: 18-7.5J +51(L) 225/40/18
Rear: 18-8.5J +60(L) 255/35/18
These wheels Rock!
S2000 AP1 Front: 18-7.5J +51(L) 225/40/18
Rear: 18-8.5J +60(L) 255/35/18
These wheels Rock!
#3
Registered User
Thread Starter
Thanx for the site. The other sites didn't show those offsets available.
Now I've got to surf that site and find the weights.
The wheels really look good! I saw them on a vette and almost crapped in my pants trying to catch him to find out what rims they were.
Now I've got to surf that site and find the weights.
The wheels really look good! I saw them on a vette and almost crapped in my pants trying to catch him to find out what rims they were.
#4
I had the Work Meister SRII's on my S2000 before. They look more classy than the CP035R's, however, the Racing Harts get a lot more attention.
So if your a show pony as well.....go the racing harts.
BTW: both of these wheels are as heavy as each other I believe. If your worried about the weight, go & buy a forged 17 inch volk, but if you want to "rock on" go with the racing harts. The quality is fantastic
So if your a show pony as well.....go the racing harts.
BTW: both of these wheels are as heavy as each other I believe. If your worried about the weight, go & buy a forged 17 inch volk, but if you want to "rock on" go with the racing harts. The quality is fantastic
#5
Registered User
Thread Starter
You've got the wheels on your car?
I thought you just knew where I could find the right offsets.
Any pics?
I want light, but I want good looking. With a name like RACING Hart and them having other heavier lines I was expecting them to be at least a little lite.
I thought you just knew where I could find the right offsets.
Any pics?
I want light, but I want good looking. With a name like RACING Hart and them having other heavier lines I was expecting them to be at least a little lite.
#6
Registered User
David B
I see you are really serious about shopping for wheels. Haha, your threads are everywhere. I carry the Racinghart wheels. And most the the RH wheels for the s2000 will have to be speical order item. 30-90 days.
Racinghart offer a 51+ offset front and back for the following wheels.
CR 3 piece, C4 3 piece - 18"/19"
CPO-35R forged, CPF-TunerR - 18"
Thx
Jeff - Evolution
703.961.9090
I see you are really serious about shopping for wheels. Haha, your threads are everywhere. I carry the Racinghart wheels. And most the the RH wheels for the s2000 will have to be speical order item. 30-90 days.
Racinghart offer a 51+ offset front and back for the following wheels.
CR 3 piece, C4 3 piece - 18"/19"
CPO-35R forged, CPF-TunerR - 18"
Thx
Jeff - Evolution
703.961.9090
Trending Topics
#8
Registered User
Originally posted by Daniel L
I believe those CP035s are forged and probably as light as Volk TE37's.
I believe those CP035s are forged and probably as light as Volk TE37's.