Acura RL caliper coversion
#62
Registered User
Nothing yet unfortunately. Fatfour is still testing last I heard and they said they would contact me when it is finished. I was hoping to have it before the start of the racing season but at their rate I won't see it until late may.
So. There's a CNC shop here that does contacting for the national Lab we have here. Another s2k owner on this forum and close friend recommended them to me. So the plan is to mock up something I can take to them and spill out all the information regarding dimensions for everyone. But hopefully at some point fatfour will have something everyone can purchase.
So. There's a CNC shop here that does contacting for the national Lab we have here. Another s2k owner on this forum and close friend recommended them to me. So the plan is to mock up something I can take to them and spill out all the information regarding dimensions for everyone. But hopefully at some point fatfour will have something everyone can purchase.
#63
Registered User
Another update... Not so good one either.
Tried a local machine shop and was blown away with the cost of a mock up bracket...I haven't heard anything back from fat4customs. So at this point I'm at an impasse.
Any suggestions would be appreciated, if not I'll continue to figure something out for everyone.
Tried a local machine shop and was blown away with the cost of a mock up bracket...I haven't heard anything back from fat4customs. So at this point I'm at an impasse.
Any suggestions would be appreciated, if not I'll continue to figure something out for everyone.
#64
Registered User
I bit the bullet and bought a BBK. Wilwood's 6 piston kit to be exact. It's mounted the same as the RL calipers, So of course I will see if the bracket will work. But at this point I won't be continuing with this project.
Thread
Thread Starter
Forum
Replies
Last Post