2JZ in an S2000?
11-17-2017, 09:35 AM
#1
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2JZ in an S2000?
Hi all! I am going to be swapping a 2JZGTE VVT-i engine into an s2000 sometime this winter and I have a few questions.
First of all, if there is anybody who has done this swap successfully and is willing to guide me through if I get stuck please message me.
1) Is there any really nice build threads you would recommend? I searched and found a couple but sometimes the good ones can be hiding somewhere.
2) What are my transmission options? I really want to run a BMW m3 Getrag 5 speed but i'm not sure if they fit the trans tunnel. I want to minimize hammer use.
3) What rear ends are people going with? The car will make roughly 600 tq to the wheels.
Thanks,
First of all, if there is anybody who has done this swap successfully and is willing to guide me through if I get stuck please message me.
1) Is there any really nice build threads you would recommend? I searched and found a couple but sometimes the good ones can be hiding somewhere.
2) What are my transmission options? I really want to run a BMW m3 Getrag 5 speed but i'm not sure if they fit the trans tunnel. I want to minimize hammer use.
3) What rear ends are people going with? The car will make roughly 600 tq to the wheels.
Thanks,
05-09-2018, 01:06 AM
#4
How is this project going?
https://www.s2ki.com/forums/engine-s...-swap-1171541/
This is a kit for a JZ/T-56 in an S2000.: https://www.grannasracing.com/collec...ap-kit-2jz-s2k
https://www.s2ki.com/forums/engine-s...-swap-1171541/
This is a kit for a JZ/T-56 in an S2000.: https://www.grannasracing.com/collec...ap-kit-2jz-s2k
Thread
Thread Starter
Forum
Replies
Last Post