Clutch release valve
#1
Clutch release valve
[SIZE=7][FONT=Arial]
S2K'ers, any advice is appreciated. My '04 is at 77K. At around 55K I had on the dealers advice, the new formula (GM) gearbox grease put in. Ever since then, despite repeated attempts w Fairfax Honda mechanics - the shifter sticks, especially when rpms are low, especially when the car isn't fully warmed up.
If anyone has any info on the clutch release valve, please respond.
Thanks!
Bill (CHOOF)
S2K'ers, any advice is appreciated. My '04 is at 77K. At around 55K I had on the dealers advice, the new formula (GM) gearbox grease put in. Ever since then, despite repeated attempts w Fairfax Honda mechanics - the shifter sticks, especially when rpms are low, especially when the car isn't fully warmed up.
If anyone has any info on the clutch release valve, please respond.
Thanks!
Bill (CHOOF)
#5
Registered User
Join Date: Oct 2007
Location: Va Beach
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
https://www.s2ki.com/forums/index.php?showtopic=275175
scroll down to the third or fourth post. It will tell you exactly what to do. And if you dont know where the slave cylinder is or how to take it off there is a link in the second post for that. I am a tard and i replaced my slave cylinder very easily.
scroll down to the third or fourth post. It will tell you exactly what to do. And if you dont know where the slave cylinder is or how to take it off there is a link in the second post for that. I am a tard and i replaced my slave cylinder very easily.
Thread
Thread Starter
Forum
Replies
Last Post