J's racing camber joints
Thread Starter
Registered User
Joined: Apr 2008
Posts: 1,593
Likes: 0
J's racing camber joints
These replace the lower front ball joints to increase available camber to around -3 degrees.
They were installed on my car for about 2300 miles. I am selling them because I needed even more camber and have replaced with the S2 version of the same product.
They are in good (but not new) condition and there is zero play in the ball joints. They come with the castle nut but do not come with the bolts. You can reuse your existing ones. You will need to purchase a cotter pin for each one.
Price - $175
new they are $375.
[attachment=33198
hoto 1.JPG]
[attachment=33199hoto 2.JPG]
[attachment=33200hoto 3.JPG]
[attachment=33201hoto 4.JPG]
[attachment=33202hoto 5.JPG]
They were installed on my car for about 2300 miles. I am selling them because I needed even more camber and have replaced with the S2 version of the same product.
They are in good (but not new) condition and there is zero play in the ball joints. They come with the castle nut but do not come with the bolts. You can reuse your existing ones. You will need to purchase a cotter pin for each one.
Price - $175
new they are $375.
[attachment=33198
hoto 1.JPG][attachment=33199
hoto 2.JPG][attachment=33200
hoto 3.JPG][attachment=33201
hoto 4.JPG][attachment=33202
hoto 5.JPG]
Joined: Jan 2003
Posts: 6,337
Likes: 1
From: Gods Speed #57 Lemons #77
These replace the lower front ball joints to increase available camber to around -3 degrees.
They were installed on my car for about 2300 miles. I am selling them because I needed even more camber and have replaced with the S2 version of the same product.
They are in good (but not new) condition and there is zero play in the ball joints. They come with the castle nut but do not come with the bolts. You can reuse your existing ones. You will need to purchase a cotter pin for each one.
Price - $175
new they are $375.
[attachment=33198hoto 1.JPG]
[attachment=33199hoto 2.JPG]
[attachment=33200hoto 3.JPG]
[attachment=33201hoto 4.JPG]
[attachment=33202hoto 5.JPG]
They were installed on my car for about 2300 miles. I am selling them because I needed even more camber and have replaced with the S2 version of the same product.
They are in good (but not new) condition and there is zero play in the ball joints. They come with the castle nut but do not come with the bolts. You can reuse your existing ones. You will need to purchase a cotter pin for each one.
Price - $175
new they are $375.
[attachment=33198
hoto 1.JPG][attachment=33199
hoto 2.JPG][attachment=33200
hoto 3.JPG][attachment=33201
hoto 4.JPG][attachment=33202
hoto 5.JPG]
Joined: Sep 2006
Posts: 10,465
Likes: 52
From: ATL
Yup! and one of the Perks to the J's stuff is you can actually buy the replacement ball joint separately so if one went bad you don't have to replace the entire part. I don't know if it's a readily available part but at least it's an option.
Thread
Thread Starter
Forum
Replies
Last Post
tekstyle
S2000 Brakes and Suspension
2
Apr 29, 2014 09:15 PM