Should it be fixed
01-02-2016, 07:11 AM
#41
mine rusted out because when i bought the car the top would leak into the trunk and the water would pool right there. i fixed the leak but when i removed the bumper this is what i found
01-02-2016, 09:23 AM
#42
Community Organizer
For working outside.
I like your overhead parts storage solution.
01-05-2016, 01:51 PM
#47
thanks guys I could use the support still got a lot of work to do and keep finding myself more to do lol. planning it out and with any luck should be in paint by march. takes time when you only have 1.5 days a week to work on it.
02-07-2016, 09:34 PM
#48
here's an update on the situation. big thanks to Billman for helping me out with getting the quarter panel. I took some pics of the inner structure of are cars. figured some of you would find it interesting. hopefully you don't see it in person lol.
DSC_0846 by liam r, on Flickr
DSC_0844 by liam r, on Flickr
the pillar around the windshield is impressive
DSC_0843 by liam r, on Flickr
here's another spot where the donor car was starting to rust. nothing serious yet but you can see how it would be an issue some day
DSC_0869 by liam r, on Flickr
around the tail light and the kick panel its just seam sealer that holds the panel on
DSC_0865 by liam r, on Flickr
DSC_0864 by liam r, on Flickr
new quarter and door installed almost done
DSC_0868 by liam r, on Flickr
DSC_0880 by liam r, on Flickr?
decided to go all out and flare the front while I'm at it
DSC_0849 by liam r, on Flickr
DSC_0890 by liam r, on Flickr
took a lot more time then I thought it would to get the metal work straight
DSC_0892 by liam r, on Flickr
working on getting the bumper to line up
DSC_0895 by liam r, on Flickr
the fenders are a little over 27mm wider then factory. I'm looking at running 9.5 +35 with a 255 how do you think they will fit? rs3 or re11 most likely
the door gaps are giving me a hard time does anyone have a close up of there door gap between the quarter and the door. or give me an idea of the size of the gap at the top of the door? I replaced both my doors so I cant go off of the other side.
DSC_0846 by liam r, on FlickrDSC_0844 by liam r, on Flickrthe pillar around the windshield is impressive
DSC_0843 by liam r, on Flickrhere's another spot where the donor car was starting to rust. nothing serious yet but you can see how it would be an issue some day
DSC_0869 by liam r, on Flickraround the tail light and the kick panel its just seam sealer that holds the panel on
DSC_0865 by liam r, on FlickrDSC_0864 by liam r, on Flickrnew quarter and door installed almost done
DSC_0868 by liam r, on FlickrDSC_0880 by liam r, on Flickr? decided to go all out and flare the front while I'm at it
DSC_0849 by liam r, on FlickrDSC_0890 by liam r, on Flickrtook a lot more time then I thought it would to get the metal work straight
DSC_0892 by liam r, on Flickrworking on getting the bumper to line up
DSC_0895 by liam r, on Flickrthe fenders are a little over 27mm wider then factory. I'm looking at running 9.5 +35 with a 255 how do you think they will fit? rs3 or re11 most likely
the door gaps are giving me a hard time does anyone have a close up of there door gap between the quarter and the door. or give me an idea of the size of the gap at the top of the door? I replaced both my doors so I cant go off of the other side.
