When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just picked up a set of Regamaster MPs:
F: 17x8+35
215/45/17
R: 17x9+38
245/40/17
My question is, I lowered my car to 13.5" hub to fender and now the rears are rubbing on the fender lip (obviously). Will rolling them be enough, or will I need to run extra negative camber in the rear? If so, how much camber do y'all normally run to get it to work?
I looked through this thread, but information was spotty at best. Thanks! (picture below is at stock ride height)
Just picked up a set of Regamaster MPs:
F: 17x8+35
215/45/17
R: 17x9+38
245/40/17
My question is, I lowered my car to 13.5" hub to fender and now the rears are rubbing on the fender lip (obviously). Will rolling them be enough, or will I need to run extra negative camber in the rear? If so, how much camber do y'all normally run to get it to work?
I looked through this thread, but information was spotty at best. Thanks! (picture below is at stock ride height)
im running same size i rolled rear qtr and relocated bumper tab and am running -4 camber on factory camber adjustment
06-11-2017, 08:02 AM
