The quest for "Flushness" using AP2 OEM Wheels!
Registered User
Joined: Jun 2008
Posts: 85
Likes: 0
[QUOTE=Glenn6one9,Feb 14 2010, 12:15 AM] Here's my contribution using Type-S wheels 
sorry phone pics
no spacer
with spacer
no spacer
with spacer
I use Project Kics 20mm Fr and 25mm Rr...straight bolt-on...
These wheels are NOT recessed, but have slight "dimples"...the 20mm BARELY clear...You cannot use 15mm, unless you want to shave/cut your stock studs, because they will protrude...
Hope this helps you AP2v3 owners
sorry phone picsno spacer
with spacer
no spacer
with spacer
I use Project Kics 20mm Fr and 25mm Rr...straight bolt-on...
These wheels are NOT recessed, but have slight "dimples"...the 20mm BARELY clear...You cannot use 15mm, unless you want to shave/cut your stock studs, because they will protrude...
Hope this helps you AP2v3 owners
Registered User
Joined: Sep 2010
Posts: 3,724
Likes: 5
From: Atlanta, GA
Stock 245s here with 20mm spacer in back (on a 1" drop). Rubbing pretty bad over big bumps. Seems like a 10mm spacer would be ideal, but with the stock AP2v2 wheels I would have to install extended studs as the stock studs would hit the wheel.
FWIW, 15mm on the front seems to be "ok", but I'm not leaving spacers on the front with nothing on the back.
Basically too much trouble for too little benefit. Back to stock for me.
FWIW, 15mm on the front seems to be "ok", but I'm not leaving spacers on the front with nothing on the back.
Basically too much trouble for too little benefit. Back to stock for me.
Registered User
Joined: Feb 2008
Posts: 529
Likes: 0
From: Planet Earth
Registered User
Joined: Aug 2008
Posts: 551
Likes: 0
From: San Diego, California
Originally Posted by S2KAKO,Nov 20 2010, 11:43 PM
20mm front with 225/40. 25mm rear with 255/40. -1.8F -3.2R
Read you got Kris' OEM HT now...can't wait to see her
Registered User
Joined: Apr 2009
Posts: 1,158
Likes: 5
From: United S2000s of America
Originally Posted by K.Shift,Nov 21 2010, 10:22 AM
oooooooo..shaved CR front bumper loooks cleeeeeean
clean car!
clean car!
[QUOTE]
Nabil, lookin' AWESOME!!!
Joined: Feb 2009
Posts: 1,880
Likes: 7
From: 91101
for those of you who know my car...will i rub if i get new stock sized tires?
im thinking no, but just want to make sure...
for those of you who dont know my car/specs here they are
25mm spacers all around
stock tire sizes
rolled all around, rear tab relocate etc.
lowered on coils, a little less than a finger all around
-2.67 camber in the rear, and i think -1.45 in the front.
im thinking no, but just want to make sure...
for those of you who dont know my car/specs here they are
25mm spacers all around
stock tire sizes
rolled all around, rear tab relocate etc.
lowered on coils, a little less than a finger all around
-2.67 camber in the rear, and i think -1.45 in the front.