this looks f-ing sweet..... how much are you lowered? and is there any rub? let me know please

 

thanks. from the ground to the highest point on the front fender, its just a hair under 25". 25.25" on the rear. fenders are all rolled, bumper tab relocated, and bumper trimmed a bunch. -2.25 front, -2.60 rear. zero rubbing after all of that but i did bang up my front left fender due to an off-track excursion. its just got pushed up and out a bit. no kink or crease. no issues on the street since im pretty careful.

 

Can't wait to get spacers...

 

I need some info guys I found a deal in my local forums for some 25mm rear and 20mm in the front. All my fenders are rolled and bumper tab relocated. I am sitting right above the tire This was my old set up and im about to pick up some ap2v1 and want to run spacers on them. Will i have enough clearance?






picture of my car currently

 

Clean!

 

Look at his front fender man..

 

If your gonna apply those wheel spacers along with your ap2v1s..you'll be fine..

i had 25mm spacers all around on my ap2v1s..lowered on coilovers(really low)..since you have your fenders rolled and tabs relocated youll have no problems..except maybe rubbing issues since it looks like your really low..but you can fix it with camber

someone on this forum was running 30mms spacers on his ap2v1 wheels in the rear..and he was SLAMMED!!lol

nice car btw

 

[QUOTE]
QUOTE (antdlp210 @ Jan 20 2011, 01:10 AM)
this looks f-ing sweet..... how much are you lowered? and is there any rub? let me know please

 

Well i got the ap2v1's on today. and do i need some spacers. The works i had were 18's and since i went to 17's the car got lower in the front bumper. my shoe would snug under the bottom of the front bumper

 

THAT IS LOW..lol..i used to be that low..

if you add 20mm spacers you will definately have some damage to your fenders and rub everywhere...but its looks SICK!!!

well you've got 3 options:

1)Raise your Car
2)Add Lots of Camber to the front
3)Go with smaller size spacer in the front.
4)Or leave it as is..lol