Yeah im thinking of taking off the wheels and measuring to find out. I will post up with results so other members can have the info also

 

NFR_AP2, I just posted in your WTB thread. The best thing to do is take off one from wheel and measure the recess depth. Then measure the length of your stock stud, and subtract 10 mm. If this is less than the recess you measured in the wheel, the 10 mm spacers will work.

 

I'm a noob and am looking at throwing some spacers on to get some mild flushness with my "stock" offset CE28's.

I'm lowered on Buddy Clubs and currently run about less than a finger gap. Fronts fenders are rolled and flared and rears will be rolled and rear bumper tab relocated.

Not looking to be extreme and barely have the tires rubbing against my body panels, but would like to get rid of the recessed look. Any recommendations on spacer sizes?

 

20/20

 

Im looking into buying spacers but now I can't seem to find any, is h&r the only ones making 20mm spacers? If any of you guys are wanting to sell you setup let me know or where i can purchase some. 20/20

 

http://www.ichibausa.com/s2000rear001.html
Those are rear, I found them locally. I think I got the H@Rs from eBay

 

http://cgi.ebay.com/ebaymotors/ws/eB...ht_4798wt_2208
Can anyone confirm this?
Does Ichiba make front 15mm spacers v2? I checked on ichiba website and also emailed them but no response. Seems legit but I want to make sure.

 

Still selling mine, H&R Spacers (Front +20mm) for 140$ shipped to USA

https://www.s2ki.com/s2000/topic/880...#entry20747775

 

Anyone got H&R Trak 20mm front Spacers and 25mm rear spacers? The bolt on kind please hit me up!

 

Has anyone gotten any wobble after putting the spacers on? I get a shake after picking up some speed, checked and bolts and re-tightened everything, could it be alignment was thrown off?