The quest for "Flushness" using AP2 OEM Wheels!
Registered User
Joined: Apr 2010
Posts: 1,493
Likes: 1
Originally Posted by Jphoa' timestamp='1317772755' post='21039879
Are you guys getting hubcentric spacers? Im doing rears all around and need to know if I would need 64.1 center bores for the fronts as well?
If lowered on springs and oem shocks, 15mm f / 20mm r... slight rub at high speed (not major enough to ruin anything)
15 f / 15 r is just to be safe (no rubbing at all).
Joined: Jul 2008
Posts: 7,957
Likes: 43
From: Troy, NY
Anyone know if the recesses in the AP2v2 rear wheel is deep enough to accomodate the stock stud if I run 15mm hubcentric spacers? I want to use the new studs on the spacer and not have to swap the factory studs.
Registered User
Joined: May 2011
Posts: 79
Likes: 3
I have factory studs all around with 15mm spacers in front and 20mm in rear. And I'm on v2s
Registered User
Joined: May 2011
Posts: 79
Likes: 3
I would think so but I'm not 100%. I didn't pay too much attention when installing because they came off another 05' like mine with v2s. Maybe make a thread in s2000 talk? There isn't much traffic in this thread.
Joined: Apr 2010
Posts: 480
Likes: 0
From: Maryland
Registered User
Joined: Apr 2010
Posts: 1,493
Likes: 1
Registered User
Joined: Apr 2010
Posts: 1,493
Likes: 1
Ill ask this again because im not super clear about it. Im trying to fit 4x 17x8.5s all around. Do I still have to buy 70.1's hubcentric spacers for the front even though im running ap2 rears in the front? I guess im just not sure what the hubcentric spacers are measuring, the hub of the car itself? Or does it measure the hub of the rims?