02 tein S tech + CR front say bar on stock damper question
#1
02 tein S tech + CR front say bar on stock damper question
i just put on Front CR sway bar on my car(02) with tein S tech springs
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
#2
Registered User
I thought the CR front sway was 392 lb/in
Why not grab the CR rear sway? $65 shipped
https://www.s2ki.com/s2000/topic/940...-need-it-gone/
Why not grab the CR rear sway? $65 shipped
https://www.s2ki.com/s2000/topic/940...-need-it-gone/
#3
i just put on Front CR sway bar on my car(02) with tein S tech springs
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
#4
Originally Posted by joelee' timestamp='1334464727' post='21608655
i just put on Front CR sway bar on my car(02) with tein S tech springs
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
just street use....nothing crazy!!! at the other hand i want my car turn faster without many happy tail!!!
by the way i'd notice that my Front is lower than the rear....do u have any idea why? like b4 i could put 2 fingers(almost) in the front gap but now is only fit one and my rear is 2
#5
I thought the CR front sway was 392 lb/in
Why not grab the CR rear sway? $65 shipped
https://www.s2ki.com/s2000/topic/940...-need-it-gone/
Why not grab the CR rear sway? $65 shipped
https://www.s2ki.com/s2000/topic/940...-need-it-gone/
F/R are almost the same....is it no good?
honestly i kinda like it my setting....when i turn, the car just goes less baby roll for sure i could feel it. about highspeed turn?
i haven't tried it yet, just tested drive in somewhere packing lot with low speed
according information by Twohoos
links https://www.s2ki.com/s2000/topic/818...nsion-springs/
| Front Rear | Front Rear
Model Year | Spring Spring | Sway Bar Sway Bar
--------------+------------------+--------------------
2000-2001 | 219 291 | 393 427
2002-2003 | 246 309 | 300 396
2004-2005 | 262 278 | 300 311
2006-2007 | 262 269 | 300 311
2008-2009 | 280 294 | 354 311
2008-2009 CR | 384 343 | 392 362
#6
Originally Posted by joelee' timestamp='1334464727' post='21608655
i just put on Front CR sway bar on my car(02) with tein S tech springs
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
CR Front sway bar specs is 28.6x4.5
Rear sway bar 27.2x4.5 (02stock)
S tech spring rate F296(5.3kg/mm)/ R363(6.5kg/mm)
here is now vs Before
now
F28.6x4.5 R27.2x4.5
F296(5.3kg) R363(6.5kg)
before
F26.5x4.5 R27.2x4.5
F240 R230
is it a good match now....any advise or pro and cons please
how about 02 stock damper is it good enough for this set up?
btw im DD
Thread
Thread Starter
Forum
Replies
Last Post
shadowz64
S2000 Modifications and Parts
19
02-20-2023 03:00 PM
Inspired
S2000 Brakes and Suspension
10
12-13-2015 04:03 PM