I'll be getting a system installed next week (hopefully and depending on when the Lucid dash controller actually ships) and am looking for crossover setting reccomendations.

I'll have JL components and sub driven by the amp and Lucids Kenwood 5.25 in the rear driven by the Apline HU. The components come wit a crossover for the tweeter and the amp and HU also have crossover settings. my question to the forum is what do you recommend for crossover settings for the various channels on the HU and Amp?

 

[QUOTE]Originally posted by petraidm
[B]
I'll have JL components and sub driven by the amp and Lucids Kenwood 5.25 in the rear driven by the Apline HU.

 

Thanks! as to specifics:
Alpine 9815 HU
Fronts jl XR 650-CSi
Amp JL 450/4
Sub Jl Stealth with 10W3V2

My thinking exactly on the crossover for tweeter since sound is to bright with the factory location. If I'm not mistaken the HU lets you set HP and LP settings for front, back and sub channels, the amp you can set either HP or LP for channel 1/2 and 3/4

 

are you guys talking about the crossover setting within the headunit itself? or is there settings on the actual crossover? sorry for the newbness.

sang

 

These would be headunit setting except were mas was talking about the -3 or -4 db settings. These are on the speaker cross over.

 

Actually crossover settings on the amp and the HU