u need to grab the blue w white strip on the aftermarket harness side not the oem side

 

FWIW, oth and R3DS2K provided you with the answer.

 

Thanks everyone for the help. It was the modifry's blue harness that I need to splice. I didn't really have to splice it. It already has a connector.

Special thanks to oth and R3DS2K for a giant help

 

Since I already made this topic. My next problem is my Alpine DCI

Do I have to splice anything ? It seems like all the wires from my modifry adapter is already connected. All I did is plug it in my DCI Module. I aslo plugged 3.5 plug in the rear of my HU. I'm reading my instructions again as I type this.



Thanks,

Ryan

 

Theoretically the Modifry harness is plug'n'play, so you shouldn't need to
splice anything except the SCV (if you are planning to use that feature).
Make sure that you have set the dip switches on the DCI correctly (per
Modifry's instructions for Alpine), and in the pictures I see some exposed
copper on the blue/yellow wire on the car's harness - make sure you tape
that up well so you don't get a short.

 

I was going to say..."are you still messin with that wire?"