Logging problem
#1
Thread Starter
Join Date: Apr 2005
Location: Boca Raton, FL
Posts: 2,282
Likes: 0
Received 0 Likes
on
0 Posts
Logging problem
There is a misfiring issue that we are trying to solve on the car and we tried to take a log from AEM EMS Series2 the other day but somehow we couldn't. After we start logging, let's say we are at 4K rpm, we start to accelerate but it stops at 6600=6700 rpm everytime and freezes there. it won't log past that rpm
We do like 2 gear pulls within one log and then when we open the log file, we see that it started from whatever rpm we start at and then it stops the log at like 6600 and its basically a straight line on all the log graphs.
The misfiring issue we are having also starts after 6600ish rpms. So I am thinking both of these problems are caused by this thing that stops to take the log at a certain rpm.
We do like 2 gear pulls within one log and then when we open the log file, we see that it started from whatever rpm we start at and then it stops the log at like 6600 and its basically a straight line on all the log graphs.
The misfiring issue we are having also starts after 6600ish rpms. So I am thinking both of these problems are caused by this thing that stops to take the log at a certain rpm.
Thread
Thread Starter
Forum
Replies
Last Post