AEM base map for ID1000's!

Reply Subscribe

Thread Tools

Oct 20, 2009 | 05:43 PM

EK9MAX

Thread Starter

Registered User

Joined: Jul 2006

Posts: 877

Likes: 0

From: Calgary, Alberta

AEM base map for ID1000's!

Does anybody have a basemap i can try to ID 1000 injectors?

I'm finally gonna start my car tonight. so i kinda need em quick!

I have a hondata 4bar map sensor too.....

PLEASE. thanks!

Oct 20, 2009 | 06:17 PM

Tech7427

Registered User

Joined: Oct 2005

Posts: 622

Likes: 0

From: Martinsburg, WV

use the supplied voltage offset and use around 180 crank injector time table
scale the injectors to 1000cc and it will start

Oct 20, 2009 | 06:33 PM

EK9MAX

Thread Starter

Registered User

Joined: Jul 2006

Posts: 877

Likes: 0

From: Calgary, Alberta

I don't even know where to input the supplied voltages.....

Oct 20, 2009 | 07:14 PM

EK9MAX

Thread Starter

Registered User

Joined: Jul 2006

Posts: 877

Likes: 0

From: Calgary, Alberta

I can email you the map if you don't mind helping me out

Oct 20, 2009 | 07:14 PM

Tech7427

Registered User

Joined: Oct 2005

Posts: 622

Likes: 0

From: Martinsburg, WV

setup > injectors > primaries > batt offset primary table

you can right click on the fuel map and select, change injectors/pressure to scale the injectors

Oct 20, 2009 | 10:02 PM

EK9MAX

Thread Starter

Registered User

Joined: Jul 2006

Posts: 877

Likes: 0

From: Calgary, Alberta

ok i found that. but my calibration table also tells me to set it according to fuel pressure....

Oct 21, 2009 | 08:56 AM

D1sclaimer

Joined: Jan 2008

Posts: 1,455

Likes: 0

From: Nebraska

Quote:

Originally Posted by EK9MAX,Oct 20 2009, 10:02 PM

ok i found that. but my calibration table also tells me to set it according to fuel pressure....

for that you have to tell it what fuel pressure you're running so it can scale it because it doesn't know. If you're running the stock FPR, use whatever the stock pressure is.

AEM base map for ID1000's!

AEM base map for ID1000's!

Trending Topics