ok, so i went to my tuner to get the greddy turbo kit tuned and before he had started tuning he had saved the base map. so after just slightly adjusting the injector percentages in the higher rpm range and nothing els, we loaded the tune to the car and tried starting it. to our suprize everything was messed up, it was saying low v-tech signal on the emanage, it was running an AFR of 10.0 exact and would not change, so we reloaded the base tune back on to it and it continued to do the exact same thing. can someone please give me a hand here, we messed with the injector delay on the base tune to get it to a drivable status to get it home, i have plans to go back on monday as we only had 2 hours on saturday to do tuning.

 

Make sure that the Firmware version on the Emanage unit and the version of the tuning software that you are using are compatible.

 

can you send the basemap to ueat1023@gmail.com I can take a look at it

 

What version is it suppose to be?

 

Do you have the blue box or the ultimate?

 

Ultimate

 

Send me the basemap