I have a garrett t3 60trim turbo going on a topmount manifold. The problem is the hotside inlet is at 90deg to the coldside outlet. With this arrangement the coldside outlet is facing directly at my valve cover.

Anybody know how to "safely" rotate the coldside on the hotside so they run parallel?
Any precautions?

 

All you need to do is loosen the 6 bolts and rotate it. If you going to pull the center section apart take the bolts out and carefully rotate it so you do not bang up the turbines.

 

Loosen 6 bolts and twist

 

hot side, cold side, does it matter?

 

both