so i installed my mase kit last week was fairly simple got the car running felt real strong only issues i had was some vibration from the exhaust after i put it on but no big deal i can adjust that. ok for the problem before when i would boost the base map that mase sent me is for 8 lbs. before it would get there then hold but after two or three days of driving arround now it just goes striaght past 8 like maybe 13-15 lbs then will cut out does any one have some good sugestions. im sure i could call mase on monday and he would know but im trying to fix this today thanks guys. later

 

hole in the line running to the gate?
line to the gate popped off?
boost controller vibrated and adjusted the setting?

 

I highly suggest you stop running the car WOT and get the thing tuned! That base map is just that, a base map.

 

Vacuum line probably came off the wg. You really need to get it tuned. Go to T1 race development or jotech in Texas.

 

i think i figued it out one of the fittings that plugs the other air holes on the wg came out.

 

Where are u located? T1 has tuned several Mase kits and countless other turbo S2000's.

 

 

He's in Oklahoma. Take it to T1

 

u are prolly hitting a boost cut. check all lines to wastegate.

 

it was just one of the air holes on the wg pluged it back up with another fitting runs fine now but thanks guys.