Lowest CTSC Pulley?
#1
Registered User
Thread Starter
Join Date: May 2007
Location: South Central PA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Lowest CTSC Pulley?
what is the diameter/boost outage of the lowest boost pulley for the comptech/cte sc? more importantly, where can i get one? thanks.
#2
4.4" 5.5psi average with AC, 6psi without AC
This is with Ap1, psi is reletive to the rpm limit, so Ap2 would lose 1psi with 1000rpm reduction at same pulley size. Their stock Comptech kit comes with a 4.2" pulley to maintain the same 5.5psi.
Contact CT engineering or Science of Speed.com for the 4.4" ap1 pulley you want.
This is with Ap1, psi is reletive to the rpm limit, so Ap2 would lose 1psi with 1000rpm reduction at same pulley size. Their stock Comptech kit comes with a 4.2" pulley to maintain the same 5.5psi.
Contact CT engineering or Science of Speed.com for the 4.4" ap1 pulley you want.
#6
Funny how quickly the OP questions/topic morphes into something else sometimes.
i'll continue the trend
Anyone run the 2.75" pulley? and if so how much boost did you make at 9k rpm?
i'll continue the trend
Anyone run the 2.75" pulley? and if so how much boost did you make at 9k rpm?