I should update this.

335rwhp now.

Comptech, aftercooled, 3.2" pulley, Invidia 70mm dual, test pipe, and Toda headers.

Just gotta get around to putting the 70mm TB on now.

 

my first trip to the dyno ended with a cracked retainer and a bent valve.
But we did get the car tuned up to 11psi it put out 400hp and 283lbsTQ.

3976r .82A/R Custom top mount set up built by Scott at Ballistic in NH.

Car is back together now and has been running strong for a few weeks.
This wekend it will be back on the dyno for more tuning. Looking for 450+ hp on 93 with 320lbTQ+

I will post up when its finished

 

lovefab gt1
2.1L motor
71mm turbo

only reved to 8700 I rev it to 10k on the street and track, so add the power accordingly. these are uncorrected numbers
15psi pump gas

 

2001 AP1 w/Individa exhaust+TP (all else is stock)
SoS SL SC
AC

Dynojet
(this actually was the 10th run, car and AC were a little warm):
72.39degF, 48% Humidity
290.69 HP @ 8600rpm
182.08 TQ @ 8300rpm
Boost = 5.15
AFR = 12.23

 

What does uncorrected numbers mean?

 

this is right off the dyno, humidity and outside temp werent factored in, after the correction it was 5% more so figure 525whp

 

353 hp
223 tq
9.5 lbs
Kpro
Sos sl

 

05 S2K
Stock 2.2 Block
gt3076r .82 a/r
3" exhaust
1000cc Bosch Inj.
Aem
Tial 44mm w/g
Pfab Top Mount

 

Where is the rest of your power? Dyno Jet I made 350whp with a 3.6 sos pulley with stock header and stock 60mm size dual Tanabe cat back and TP.

 

480whp 370ft/lb @ 18-19psi

GT3076R .82 hotside
PFAB topmount Log turbo kit
3" exhaust, HKS Ti muffler
ACT HD
AEM 1052

It makes 360-370whp on pumpgas 10psi.