Currently I'm running the prototype dual exhaust. Toan has requested 1 minor change from the company producing the exhaust system. The kits are allllllmost ready. Just waiting for the finalized exhaust system.

The second day of my weekend oil temps maxed at 228*F and coolant remained around 190*F. In comparison a fellow s2ker running the comptech supercharger was seeing oil temps at 245*F. That owner also had an oil cooler (although a different set up). He reported oil temperatures will get as high as 260*F on warm days.

Power - I made 384 hp at the rear wheels and 272 ft/lbs on 12.5 PSI. My car was featuring the recirculating dump, which is one of the reasons I made slightly less power than the mock up vehicle aka Allan (HMFIC's car).

I'm working on uploading video to youtube. I should have something to post in the morning.

 

Was his oil temp sensor in the pan also? If his was on the oil filter then his oil temp is very similar to yours.

Man that recirculating dump takes more HP then I expected but I hate open dump too much

 

I wonder how that new motor mount will hold up to the heat overtime.

 

Part 1 of the video is up! Let's see if I can do this right on the first try.
[media]http://www.youtube.com/watch?v=zmOuMX4WyN0 [/media]

I'm open to constructive comments on my driving. I'm no professional hotshoe but I enjoy going to the track and learning.

Video shot with a Kodak Zi8 at 720p, 60fps. Needs an external mic to remove the wind noise.

 

Very interesting read!

Will this kit fit UK RHD vehicles? If so I have the money waiting to buy one. Ah except I already bought a precision 6262 .82ar V band inlet/outlet turbo and precision 46mm wastegate. Will these fit/be adapted to fit?

Thanks for any info. I'll hold off on what I was about to buy for the minute...

 

no, it appears this kit wont work on RHD s2000s due to the rhd steering shaft/rack.

 

mother ****er lol

 

[QUOTE=dsddcd,Nov 5 2010, 04:45 PM]Just say the word and I will ship it to you.

 

We're trying our best to make things happen as quickly as possible, but it appears that the exhaust components will delay things. We'll make every effort to provide customers with a more precise ship date as soon as we possibly can. Thanks for your continued patience.

- Toan

 

Sean, thanks again for your patience. We'll be taking A LOT of pics of your turbo install and dyno results as well.

- Toan