Turbo Setups
02-02-2005, 04:24 PM
#1
Registered User
Thread Starter
Join Date: Nov 2004
Location: Sydney
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Setups
Hi guys i'm from australia and was looking at purchasing a bolt on turbo kit from the states...
i found the following and was wonddering if:
a) will it bolt on to the Aussie models
b) what you guys think of the actual kit
Your opinon will be greatly appreciated heres the link guys:
http://www.ultimate-racing.com/Products/Ho...KTurboKit.shtml
i found the following and was wonddering if:
a) will it bolt on to the Aussie models
b) what you guys think of the actual kit
Your opinon will be greatly appreciated heres the link guys:
http://www.ultimate-racing.com/Products/Ho...KTurboKit.shtml
02-03-2005, 04:20 AM
#2
Registered User
Join Date: Jan 2005
Location: maryville, tn
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
at first glance i was gonna a TO4E/T4 housing was big for just 7 lbs of boost. But that torque curve on the dyno is perfect.... no dips up top and flat from 5.5k to redline. and its only 10lbs off the peak. 
thats the kinda curve you want... no mention of a fuel pump tho. and an ignition upgrade could prolly net some more power. seems fairly complete. I'd see if i could get the compressor map for that turbo...
just my 2 cents.
thats the kinda curve you want... no mention of a fuel pump tho. and an ignition upgrade could prolly net some more power. seems fairly complete. I'd see if i could get the compressor map for that turbo...just my 2 cents.
02-03-2005, 05:08 AM
#3
Registered User
Join Date: Dec 2003
Location: Virginia Beach
Posts: 7,271
Likes: 0
Received 0 Likes
on
0 Posts
I think i would wait for this setup in this thread.
https://www.s2ki.com/forums/index.php?showtopic=264261
Read up on it, and see what you think. look at the dyno graph in that thread as well.
https://www.s2ki.com/forums/index.php?showtopic=264261
Read up on it, and see what you think. look at the dyno graph in that thread as well.
02-03-2005, 02:29 PM
#4
Registered User
Thread Starter
Join Date: Nov 2004
Location: Sydney
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
thats a pretty impressive turbo setup but i really dont want to have to relocate the battery...
I'm really looking for something that is a simple bolt on kit
If you guys find any sites please let me know...
Thanks guys!!!
I'm really looking for something that is a simple bolt on kit
If you guys find any sites please let me know...
Thanks guys!!!
02-03-2005, 03:39 PM
#5
Registered User
Join Date: Jan 2004
Location: Ph-Ph-Ph-Phoenix
Posts: 1,610
Likes: 0
Received 0 Likes
on
0 Posts
Isn't your car Right hand drive if it's an "Aussie model". That should take care of the battery relo problem. I would look into JDM kits because they will be tailored to the different layout.
02-03-2005, 04:50 PM
#6
Banned
Join Date: Aug 2003
Location: BOWIE
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
02-03-2005, 08:11 PM
#7
Registered User
Thread Starter
Join Date: Nov 2004
Location: Sydney
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
The reason why i'm looking for a bolt on kit from the states is because you guys have put alot of R & D into Honda turbo kits and basically you know your stuff....
Also because my car is right hand drive, i wouldnt have to relocate the battery???
P.S. thanks for link to the Elda turbo...Now that is Awesome
Also because my car is right hand drive, i wouldnt have to relocate the battery???
P.S. thanks for link to the Elda turbo...Now that is Awesome
Trending Topics
02-03-2005, 09:51 PM
#8
Rev, the biggest problem is the steering shaft. You can bet most of the USDM kits interfere with it and you can't go round corners without it.
Check the Aus For Sale section. Adrianc has a kit for sale that I have seen personally.
It's an awesome kit but the turbo itself is just wrong. It's an HKS 3037 with 1.03 turbine AR. I would expect heaps of lag.
Check the Aus For Sale section. Adrianc has a kit for sale that I have seen personally.
It's an awesome kit but the turbo itself is just wrong. It's an HKS 3037 with 1.03 turbine AR. I would expect heaps of lag.
02-14-2005, 05:16 AM
#9
In the meantime I'm working with Tinker to confirm that his kit will fit RHD. We should have a manifold and downpipe here soon and can try it out. I'll keep you informed.
02-14-2005, 03:26 PM
#10
Registered User
Thread Starter
Join Date: Nov 2004
Location: Sydney
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Yeah please keep me informed Aus2000. I know theres a few S2K owners in Sydney who want to go turbocharged.
P.S. Have you been on the S2K cruises to Kiama with Black SIIK e.t.c????
P.S. Have you been on the S2K cruises to Kiama with Black SIIK e.t.c????