Thinmint Tail Light Mod
Registered User
Joined: Feb 2010
Posts: 3,263
Likes: 0
From: Stamford, CT
Subscribed. I might have to go to Ap1 tails if thats the only way to go about this but im sure you can enlighten us how to get around that if its only different size lights.
Thanks for putting up this guide! Im sure you were getting annoyed of me putting up all the comments on your build thread telling you to share.
Thanks for putting up this guide! Im sure you were getting annoyed of me putting up all the comments on your build thread telling you to share.
Registered User
Joined: Oct 2010
Posts: 348
Likes: 0
nice! 
just a small suggestion, but what if you painted the pcb board the leds sit on so it doesnt stick out so much in the daylight, or maybe find a red diffuser to go over the leds so you cant see the white ring.
looks good tho
just a small suggestion, but what if you painted the pcb board the leds sit on so it doesnt stick out so much in the daylight, or maybe find a red diffuser to go over the leds so you cant see the white ring.
looks good tho
Registered User
Joined: Jul 2012
Posts: 7
Likes: 0
Awesome man. Have you thought that the computer is not reading as much of a drop as it should from the relay as it does from a normal bulb, as to the reason it blinks faster. And the pulse modulation is to fast from the blinkers going faster for the relays to let the LEDs turn off. You should just try to put the proper size resistor in the coil side of the relay circuit to slow the blinking down.
Registered User
Joined: Feb 2012
Posts: 226
Likes: 0
so the 120mm and the 130mm...
is that the diameter of the lens (clear and red oem) too?
i wanted to do this for a while, but never knew the size, and i want to keep the factory lenses in place. using rings behind them.
my custom del sol LED tails were easy, as i just used 4" trucklites units. made them all plug and play too
is that the diameter of the lens (clear and red oem) too?
i wanted to do this for a while, but never knew the size, and i want to keep the factory lenses in place. using rings behind them.
my custom del sol LED tails were easy, as i just used 4" trucklites units. made them all plug and play too