DIY Axle-Back Exhaust for the S2000
#1
DIY Axle-Back Exhaust for the S2000
I basically followed Rob Robinette's instructions for this single exit DIY exhaust, see this link: https://robrobinette.com/S2000RobModExhaust.htm
Only difference is I added a Ø2.5" straight thru muffler by Megan Racing.
Here's how it sounds
Basically a ~$200 exhaust, cheaper if you don't put a muffler on like I did.
This is my first real fabricating project and I wouldn't call it perfect, but it went pretty well! Always tack weld, test fit, cut where needed or adjust, tack weld, and so on until you've got it where you want it. I'll take a rolling video soon and share it here.
Only difference is I added a Ø2.5" straight thru muffler by Megan Racing.
Here's how it sounds
Basically a ~$200 exhaust, cheaper if you don't put a muffler on like I did.
This is my first real fabricating project and I wouldn't call it perfect, but it went pretty well! Always tack weld, test fit, cut where needed or adjust, tack weld, and so on until you've got it where you want it. I'll take a rolling video soon and share it here.
#4
Thread
Thread Starter
Forum
Replies
Last Post
Swiftvision
S2000 Under The Hood
19
05-06-2004 11:01 AM