Non staggered wheels?

Reply Subscribe

Thread Tools

Mar 26, 2010 | 02:46 PM

#11

Random1

Joined: May 2004

Posts: 1,531

Likes: 3

From: Tucson

I am running -2 camber, 0 toe front and -2 camber, -1/8" total toe rear.

Tires are 255 17 40 Star Spec on 8.5" OEM wheels all the way around.

Rear toe settings are personal preference for how loose you like the back end and it will be different from AP1 to AP2.

Mar 26, 2010 | 02:46 PM

#12

rjones

Registered User

Joined: Nov 2006

Posts: 616

Likes: 1

From: McKinney, TX

Quote:

Originally Posted by whitt1,Mar 26 2010, 01:17 PM

No ride height change, stock CR suspension.

Did you put on a big front sway bar? If not I think you are going to be real lose with the stock suspension.

Mar 26, 2010 | 02:56 PM

#13

whitt1

Thread Starter

Registered User

Joined: Sep 2009

Posts: 140

Likes: 0

From: Germantown TN

Stock sway bars front and rear, car is new with less than 4000 miles.

Mar 26, 2010 | 03:03 PM

#14

rjones

Registered User

Joined: Nov 2006

Posts: 616

Likes: 1

From: McKinney, TX

Quote:

Originally Posted by whitt1,Mar 26 2010, 02:56 PM

Stock sway bars front and rear, car is new with less than 4000 miles.

Then take it easy on the first few runs till you get used to the balance.

Mar 26, 2010 | 03:12 PM

#15

WynnS123

Registered User

Joined: Dec 2006

Posts: 6,890

Likes: 1

From: Brandon, MS

Quote:

Originally Posted by Squirtle,Mar 26 2010, 01:32 AM

Have you run a pyrometer to see if the alignment is working? My guess is no, otherwise you wouldn't still be running a cookie cutter alignment spec.

I borrowed a friend's pyrometer, and I could use more front camber, but I can only get 2.1 max from my setup.

Mar 26, 2010 | 03:29 PM

#16

kinchu007

Joined: Jul 2008

Posts: 900

Likes: 1

From: Reseda, CA

I have a non-stagg CR and it doesn't wander that much...when you hit bumps does the car bounce up/down more or left/right more...if it's left/right more then you should re-check the alignment