Well i took my 04 to the dyno today, 23,000
it put down 214.9HP and 148Tq on a dyno jet.
Only thing not stock on the car is a drop in K&N
i was very happy with the numbers i was expecting around 190 or so.

i'll post up the dyno sheet in a little while
derek
here's one of the dyno sheets it shows 213 i think
but it did make 214 on the third run

and here's the VID

http://www.putfile.com/dken



derek

 

any other s2ks dyno on this dyno?

 

An Ap1 with intake, Header and Exaust out down 201Whp during the winter
and about 6 other cars dynoed with me and all put down less than befor cause they dynoed in 45 degree weather last time, it was 88 today
derek

 

previous owner of my 04 reported 218 stock. congrats.

 

yeah 210-ish is around what most ap2's dyno at on a dynojet, give or take due to dyno variances.

 

Sweet. i have a video of it anyone know a good place i can host it?
thanks derek

 

This sounds about right, afterall AP2 > AP1


Bring it on, I'm ready!


J/k J/k Awesome dyno though, can't wait to get mine done. Imagine how much power you would have put down if you had the fastest color!

 

Question: Do dyno curves for all S2000s look that smooth?

I remember looking at some dynos before (mainly ITRs and MR2s) and they looked rather rough, but this one's like ... smooooth!!! Or maybe the image was blury/my eyes are blury ...

 

actually yes. by about 2500rpm the S2000 torque curve is quite flat until about 6000rpm. and then, from 6000-redline, it once again remains fairly flat.

 

Nice #'s