Another Invidia thread
http://youtube.com/watch?v=HH9ZOZXIW9I
Ok so after a few questions regarding my exhaust, here is a clip. A couple revs to 3K, 5K, 7K, and 8K. Its a V1 without the burnt tips and running an Invidia test pipe. My opinion of the exhaust:
Sound: VERY Loud, deep tone
Drone: Minimal with TP, but due to deep tone, at the wrong throttle pressure you do get vibrations throughout the cabin between 2800-3400rpm.
Quality: Its fairly light (I believe I've read 26lbs vs 50lbs OEM) and appears to be of good quality, with a nice finish on the tips.
Install: Like any exhaust, very simple. Remove the rear subfram connector, unbolt, etc. This exhaust did not come with exhaust hangers and the tips touched the bumper upon initial install. A quick trip to Autozone and 4 bucks later I had two new exhaust hangers (with multiple holes for different height adjustment).
Other: I took the invidia logos off because I think theyre ugly and I've read the tack welds can come loose and rattle on the exhaust. Also, as a side note if you don't like loud, this is NOT the exhaust for you. It gets attention from everyone! On the interstate/cruising, it calms down to an almost inaudible level.
Now its time for your opinions - Let me know what you think.
Rick
Ok so after a few questions regarding my exhaust, here is a clip. A couple revs to 3K, 5K, 7K, and 8K. Its a V1 without the burnt tips and running an Invidia test pipe. My opinion of the exhaust:
Sound: VERY Loud, deep tone
Drone: Minimal with TP, but due to deep tone, at the wrong throttle pressure you do get vibrations throughout the cabin between 2800-3400rpm.
Quality: Its fairly light (I believe I've read 26lbs vs 50lbs OEM) and appears to be of good quality, with a nice finish on the tips.
Install: Like any exhaust, very simple. Remove the rear subfram connector, unbolt, etc. This exhaust did not come with exhaust hangers and the tips touched the bumper upon initial install. A quick trip to Autozone and 4 bucks later I had two new exhaust hangers (with multiple holes for different height adjustment).
Other: I took the invidia logos off because I think theyre ugly and I've read the tack welds can come loose and rattle on the exhaust. Also, as a side note if you don't like loud, this is NOT the exhaust for you. It gets attention from everyone! On the interstate/cruising, it calms down to an almost inaudible level.
Now its time for your opinions - Let me know what you think.
Rick
Originally Posted by snguyen,Nov 9 2007, 07:25 PM
that thing is spitting out monster truck noise ^^
Thread
Thread Starter
Forum
Replies
Last Post
Subie2Honda
S2000 Modifications and Parts
2
Aug 7, 2014 07:08 AM
JohnnyP912
S2000 Modifications and Parts
27
Mar 8, 2009 08:13 AM
topcat7111
S2000 Under The Hood
7
Apr 30, 2005 05:54 PM



