Cheapest way to 350WHP ?
that is probably my new favorite pic 
Registered User
Joined: Dec 2004
Posts: 133
Likes: 0
From: North Idaho
Originally Posted by afwfjustin,Dec 21 2007, 09:03 AM
6 thousand dollars will have to be spent if you go with used parts. If you buy new, prepare to spend 8 thousand.
Or, buy an EMS, 3mm headgasket, and a ton of nitrous. Retard the hell out of the timing, and make sure your tune is spot on. You should be able to accomplish it this way for about 3-4 thousand depending on whether or not you can install the headgasket on your own.
Or, buy an EMS, 3mm headgasket, and a ton of nitrous. Retard the hell out of the timing, and make sure your tune is spot on. You should be able to accomplish it this way for about 3-4 thousand depending on whether or not you can install the headgasket on your own.
Nitrous LOVES high compression. Just retard the timing and get a good tune and you will be set.
Wow lower the compression and nitrous
Joined: Jan 2006
Posts: 16,548
Likes: 1
N2O is the cheapest way. But it's not always there.
SC is porbably the most reliable.
Turbo is the most power.
the choice is yours.
Here's my dyno sheet.
SC is porbably the most reliable.
Turbo is the most power.
the choice is yours.
Here's my dyno sheet.
Thread
Thread Starter
Forum
Replies
Last Post