engine oil spill ...
Thread Starter
Registered User
Joined: Nov 2001
Posts: 6,006
Likes: 0
From: socal
engine oil spill ...
when i was trying to add a little engine oil to my S2K today ...
i spilled a little engine oil ...
i wiped it down clean where i can see it. but some run through the entire block and dripped on the ground ...
do i need to worry about anything? clean them all?
oil runs into the spark plug?
anything?
i spilled a little engine oil ...
i wiped it down clean where i can see it. but some run through the entire block and dripped on the ground ...
do i need to worry about anything? clean them all?
oil runs into the spark plug?
anything?
Registered User
Joined: Dec 2000
Posts: 3,362
Likes: 0
From: South Bay
oh no, take it back...j/k
shouldnt be too much of a prob. wipe off what you can see, the rest will drip off or nurn off. just dont be surprised to spell a little burnt oil the first few miles.
shouldnt be too much of a prob. wipe off what you can see, the rest will drip off or nurn off. just dont be surprised to spell a little burnt oil the first few miles.
Registered User
Joined: Feb 2002
Posts: 2,960
Likes: 2
From: Transporter
Just don't use "engine brite" or any other sort of strong cleaner to try to clean it. If you do, you can strip the paint of your valve cover and etch permanant ugly on surfaces of parts. Something like slightly diluted car washing soap should get rid of most of it. Even simple green tends to make all your rubber parts turn greenish brown.
and etch permanant ugly on surfaces of parts. Something like slightly diluted car washing soap should get rid of most of it. Even simple green tends to make all your rubber parts turn greenish brown.
Thread
Thread Starter
Forum
Replies
Last Post
