Removing Passenger Front Panel
Registered User
Joined: Jan 2007
Posts: 2,077
Likes: 1
From: Addison, IL West side
Exactly what I was thinking. As far as the tornados in Wisconsin, that was unfortunate. They couldn't really enjoy the beautiful weather like we did. It still isn't too bad. We are probably still in the high 49s to low 50s right now. Loving it while it lasts. Global warming for the FTMFW!!!
Joined: May 2007
Posts: 270
Likes: 0
There was a link but, I don't want to go looking again. I did mine last night. Took about 5 minutes. One screw in the middle top, and two push pins on the sides. Pulled straight toward yourself and not down. Very easy, I didn't even have to put any force into it. Gl.
Registered User
Joined: May 2005
Posts: 5,252
Likes: 1
From: Hong Kong
Originally Posted by Hockey,Jan 9 2008, 04:18 PM
Bingo. There are countless times when I am in traffic on the freeway onramp, waiting for the metering lights to let us on and I feel like dropping the top. Since you end up at a steady 3-5 mph while crawling towards the metering light, there really isn't an opportunity to pull the e-brake and sit in one place for 8 seconds (without getting honked at, or cut in front of).
Those of you that live in big cities will understand.
-Hockey
Those of you that live in big cities will understand.
-Hockey
Another situation is when you are in the middle of HEAVY traffic jam trying to get your way into the tunnel, and when all the cab drivers are honking like there is no tomorrow.
This mod is totally needed ...
Registered User
Joined: Jul 2007
Posts: 101
Likes: 0
Cutting wires? Give me a break! Pull the e-brake up ONE click and it will do the same thing as fully engaging it, all it will do is put a light on your dash. You can do it at 50mph if you want to at that point, the brake hasn't even started to engage with one click.
It doesn't need to engage, the sensor simply needs to touch another sensor.
It doesn't need to engage, the sensor simply needs to touch another sensor.
Thread Starter
Registered User
Joined: May 2005
Posts: 3,010
Likes: 0
From: Orange County, CA
Originally Posted by stickercutting,Jan 13 2008, 08:28 PM
Cutting wires? Give me a break! Pull the e-brake up ONE click and it will do the same thing as fully engaging it, all it will do is put a light on your dash. You can do it at 50mph if you want to at that point, the brake hasn't even started to engage with one click.
It doesn't need to engage, the sensor simply needs to touch another sensor.
It doesn't need to engage, the sensor simply needs to touch another sensor.
You can go try this out if you like. Unless you bought a used car that had this already done to it....
Thread Starter
Registered User
Joined: May 2005
Posts: 3,010
Likes: 0
From: Orange County, CA
Originally Posted by Jrz,Jan 9 2008, 06:44 PM
There was a link but, I don't want to go looking again. I did mine last night. Took about 5 minutes. One screw in the middle top, and two push pins on the sides. Pulled straight toward yourself and not down. Very easy, I didn't even have to put any force into it. Gl.
No clips broken, wire cut, and taped up successfully. MOD completed just fine with no glitches.
Can't beat free!
Registered User
Joined: Nov 2005
Posts: 412
Likes: 0
I found the link for anyone interested.
Use google instead of the search feature by entering "site:s2ki.com convertible top while moving" without the "" and you will find it.
SC Highlander's top down while moving mod.
I believe derived from Modifry's site.
Use google instead of the search feature by entering "site:s2ki.com convertible top while moving" without the "" and you will find it.
SC Highlander's top down while moving mod.
I believe derived from Modifry's site.
