i had my master and my slave replaced, i greased the nipple of the slave and also the clutch fork.
both my master and slave is new, i also bleed the system.
clutch feels good when the car is still cold, but once it warms up and gets driven for a little bit, the clutch pedal starts squeaking. when pressing down.
when releasing its a little sticky feel like its creaking i have no idea how to explain it. usually feel it more on the bottom of the pedal, and towards the catch point.

please shed light, i greased nipple the rod connecting the pedal and the master cyl. dont know what else i can grease or what im doing wrong.

anyone know how i can check to see if there is still air in the system by looking?

watch videos and read diy. am i not greasing things right ?

 

Sounds like could be throw out bearing going bad?

 

yup, if you replaced both slave and master and greased the slave, then sounds like the throwout bearing.