okay...so now i got my aem fuel pressure regulator and i am ready to tap into fuel rail for the fuel pressure gauge....someone told me to go to autolink...autolink says theve never done it before...and they wont gaurantee it....now...i just wanna know....people who have done this...got any pictures...? and if someone coudl tell me how it turned out..i basically wanna know exactly where to tap it.....thank you

 

This is a fuel presure transducer, but the same principle applies for a gauge.

 

wow, just leave it alone. If you're having so much of a hard time installing a FPR and a gauge, maybe you shouldn't be doing it. The instructions and help given from the very first few posts were pretty clear and the rest were just repetitious. Either listen and do it plus add a little common sense or don't do it at all. You seem to be confusing yourself and making things much more difficult than they are or need to be. I suggest you take off the fuel rail and look at it. It's not difficult to figure out where there's actual fuel. Plus the pictures provided early on by fperra was pretty clear if you asked me.

 

 

i am not having trouble installing a fuel pressure regulator....i put my own damn turbo kit together....the only problem is.....i take this information and other peoples info...and compare and it confuses me sometimes because so many people bs about stuff......so i just wanted to make it clear...and at first...i didnt even realize wut the picture was until i took the time to look at it...either way....i am gonna go get it tapped tommorow....i just didnt want someone doin a mickey mouse job on it and then get assed out....but anyways...thanks for the help guys...sorry i made this so difficult.....